An incoming signal is at a frequency of 500kHz. This signal needs to be acquired and all other signals attenuated. Design a passive bandpass filter to do this. Do this by combining a high pass and a low pass filter. For our purposes, create a pass band width of exactly 40kHz and is centered at the ideal frequency. R = 2kOhms. Select C[lowpass], enter value in terms of nF =

C_h = 0.166 nF

C_L = 0.153 nF

Explanation:

Given:

- Ideal frequency f_o = 500 KHz

- Bandwidth of frequency BW = 40 KHz

- The resistance identical to both low and high pass filter = 2 Kohms

Find:

Design a passive band-pass filter to do this by cascading a low and high pass filter.

Solution:

- First determine the cut-off frequencies f_c for each filter:

f_c, L for High pass filter:

f_c, L = f_o - BW/2 = 500 - 40/2

f_c, L = 480 KHz

f_c, h for Low pass filter:

f_c, h = f_o + BW/2 = 500 + 40/2

f_c, h = 520 KHz

- Now use the design formula for R-C circuit for each filter:

General design formula:

f_c = 1 / 2*pi*R*C_i

C, h for High pass filter:

C_h = 1 / 2*pi*R*f_c, L

C_h = 1 / 2*pi*2000*480,000

C_h = 0.166 nF

C, L for Low pass filter:

C_L = 1 / 2*pi*R*f_c, h

C_L = 1 / 2*pi*2000*520,000

C_L = 0.153 nF