Engineering

Calvin Hurley

1 May, 11:31

Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from the person if the exposed surface area and the average outer temperature of the person are 1.6 m2and 29°C, respectively. The convective heat transfer coefficient is 6W/m2-k and the emissivity of the person is 0.95.

+5

Answers (1)

Know the Answer?

Not Sure About the Answer?

Get an answer to your question ✅ “Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from the person if the exposed surface area ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.

Search for Other Answers

You Might be Interested in

The boundary-layer thickness, δ, on a smooth flat plate in an incompressible flow without pressure gradients depends on the freestream speed, U, the fluid density, rho, the fluid viscosity, μ, and the distance from the leading edge of the plate, x.

Ceramics are inorganic materials mainly consist of hydrocarbons. a) - True b) - False

Motor oil is responsible for

Alloy parts were cast with a sand mold that took 160 secs for a cube-shaped casting to solidify. The cube was 50 mm on a side. (a) Determine the value of the Chvorinov's mold constant.

Pro-Cut Rotor Matching Systems provide a non-directional finish without performing additional swirl sanding - true or false?

New Questions in Engineering

What is the definition of a fluid?

You are ordering steel cable for a 250 foot long zip-line you are building in your back yard. The cable can be ordered in diameters with 1/16 inch increments. (1/16, 1/8, 3/16, 1/4, 5/16, 3/8, etc.

Which of the following statements is LEAST-Likely true? A) Do not attempt to unseat the beads of an inflated tire. B) Do not strike the tire or rim with a hammer. C) A hammer is sometimes necessary when removing a passenger car tire.

What is the pitch circle diameter of a 50-tooth spur gear having a circular pitch of 0.375 inch

Emergency plans are being formulated so that rapid action can be taken in the event of an equipment failure. It is predicted that if a particular pipeline were to rupture, it would release ammonia at a rate of 100 lb/s.