Engineering

Kylie Trevino

7 February, 11:38

A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft, what design speed was used?

+2

Answers (1)

Know the Answer?

Not Sure About the Answer?

Get an answer to your question ✅ “A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.

Search for Other Answers

You Might be Interested in

A mass is dropped (i. e., initial v=0) from the top of a tall building at a height of 300 m. If we neglect air friction, find the velocity of the object when it hits the ground (m/s). g = 9.8 m/s^2

What is a split wired receptacle

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

Where are NIST's primary locations?

If jobs arrive every 15 seconds on average, what is the probability of waiting at most 30 seconds?

New Questions in Engineering

Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L.

The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius

Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.

What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution

The controller can be considered the brain of closed loop system