A brass alloy is known to have a yield strength of 240 MPa (35,000 psi), a tensile strength of 310 MPa (45,000 psi), and anelastic modulus of 110 GPa (16.0 x 106 psi). A cylindrical specimen of this alloy 15.2 mm (0.60 in) in diameter and 380 mm (15.0 in) long is stressed in tension and found to elongate 19 mm (0.075 in.). On the basis of the information given, is itpossible to compute the magnitude of the load necessary to produce this change in length? If so, calculate the load; if not, explain why.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “A brass alloy is known to have a yield strength of 240 MPa (35,000 psi), a tensile strength of 310 MPa (45,000 psi), and anelastic modulus ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Copper is generally considered easy to weld because of its high thermal conductivity: (a) true or (b) false?
Answers (1)
According to the place-time model of interaction, when people are in the same place, but at different times, this is an example of what type of communication?
Answers (1)
A person is attempting to start a 20hp diesel engine with a hand crank. The distance from the handle to the center of rotation is 12 inches. The person is able to apply 25 lbf tangent to the circular path of the handle.
Answers (1)
Place the following steps for calculating net worth in the correct order.
Answers (1)
In successive an object moves from start position, then moves 1ft, 4ft and 8ft. This is an example of a. non-uniform motion b. uniform acceleration c. uniform motion d. free fail in Earth's gravitational field.
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)