Ask Question
EngineeringEngineering
2 August, 21:12

1. What is the linear distance traveled in one revolution of a 9 in diameter wheel?

2. An industrial water shutoff valve is designed to operate with 15 Ib of effort force. The valve will encounter 155 Ib of resistance force applied to a 0.85 in diameter axle. What is the actual mechanial advantage of the sytem?

3. If the diameter of the wheel is 10.5 inches, what is the efficiency of the wheel and axle system?

4. A block and tackle system with 8 supporting strands is used to lift materials in a manufacturing facility. The motor being used to wind the cable in the pulley system can provide 200 Ib of force. What is the ideal mechanical advantage of the pulley system?

5. Ideally what is the maximum weight of materials that can be lifted?

+1
Answers (1)
  1. 2 August, 23:30
    0
    1. Circumference is pi times diameter.

    C = πd

    C = 9π inches

    C ≈ 28.3 inches

    2. Mechanical advantage is ratio of output force to input force.

    MA = Fout / Fin

    MA = 155 lb / 15 lb

    MA ≈ 10.3

    3. Mechanical advantage is ratio of input distance over output distance.

    MA = din / dout

    MA = 10.5 in / 0.85 in

    MA ≈ 12.4

    4. Mechanical advantage of pulley system is the number of strands.

    MA = 8

    5. Mechanical advantage is ratio of output force to input force.

    MA = Fout / Fin

    8 = Fout / 200 lb

    Fout = 1600 lb
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “1. What is the linear distance traveled in one revolution of a 9 in diameter wheel? 2. An industrial water shutoff valve is designed to ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Why would a rectangular shaped boat hold more weight than a circle boat
Answers (1)
In the process of nuclear fusion, a. two or more nuclei fuse or stick together to form a heavier nucleus whose combined mass is slightly greater than the original nucleus b.
Answers (1)
g The pump inlet is located 1 m above an arbitrary datum. The pressure and velocity at the inlet are 100 kPa and 2 m/s, respectively. The pump exit is located 4 m above the same datum. The pressure and velocity are 500 kPa and 3 m/s, respectively.
Answers (1)
Why is my dog barking?
Answers (2)
During a simple cooling process, atmospheric air with humidity ratio of 4.5 g vapor / kg dry air is cooled from 30 celcius to 20 celcius. what is the wet bulb temperature (celcius) of the cooled atmospheric air?
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)
Home » Engineering » 1. What is the linear distance traveled in one revolution of a 9 in diameter wheel? 2. An industrial water shutoff valve is designed to operate with 15 Ib of effort force. The valve will encounter 155 Ib of resistance force applied to a 0.
Sign Up Forgot Password?