Ask Question
EngineeringEngineering
4 April, 23:10

There are totally (___) slip system in an FCC metal.

+5
Answers (1)
  1. 4 April, 23:58
    0
    Answer: 12

    Explanation: In FCC metal lattice there are total four octahedral slip plane and six direction where each are common to two octahedral plane and so that gives total of three slip direction. So the total slip system is multiplication of the slip plane and the slip direction that is twelve.

    Slip system=Slip plane*Slip direction

    Slip system = 4*3=12

    Therefore there are total 12 slip system in the FCC metal lattice.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “There are totally (___) slip system in an FCC metal. ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
A complex gear drawing done on a drawing sheet marked M-1 has many section views showing important interior details of the gear.
Answers (1)
A resistor, inductor and capacitor are connected in series, each with effective (rms) voltage of 65 V, 140 V and 80 V, respectively. If the resistor is rated at 24 W, what is the average power dissipated in the circuit
Answers (1)
Critically analyse a common engineered product in terms of the materials used, the processes required to manufacture the product, and the historical context of the material leading to its present form
Answers (1)
How much to build a barber clipper?
Answers (1)
16.1 (a) Briefly explain the difference between oxidation and reduction electrochemical reactions. (b) Which reaction occurs at the anode and which at the cathode?
Answers (1)
New Questions in Engineering
Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L.
Answers (1)
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
Home » Engineering » There are totally (___) slip system in an FCC metal.
Sign Up Forgot Password?