Why do we need the metering devices? List the basic types.

A rigid, sealed cylinder initially contains 100 lbm of water at 70 °F and atmospheric pressure. Determine: a) the volume of the tank (ft3). Later, a pump is used to extract 10 lbm of water from the cylinder.

Which is/are not a mechanism commonly associated with tool wear (mark all that apply) ? a. Adhesion b. Attrition c. Abrasion d. Coercion

When is it appropriate to model a structural element as a beam?

A scrubber on a coal-fired power plant is useful to remove a. sulfur dioxide. b. carbon dioxide. c. particulate matter.

Problem 13.182 Block A is released from rest and slides down the frictionless surface of B until it hits a bumper on the right end of B. Block A has a mass of 10 kg and object B has a mass of 30 kg and B can roll freely on the ground.

Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L.

The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius

Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.

What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution

The controller can be considered the brain of closed loop system