Fault Tolerance for the Canning DepartmentThe Canning Department uses one server to run the canning conveyor machinery, which operates 24 hours a day. The server has some built-in fault tolerance, such as two network interface cards and battery backup for its power supply. However, no fault tolerance is provided for the single hard drive in the server, which is configured as a basic disk. Fault tolerance is important for this server because the company loses over $15,000 an hour when the conveyor machinery is down. Create a short report with your recommendations for fault tolerance, including general guidelines for setting it up. Case

Question

Computers & Technology

Marisa Rush

24 February, 14:59

Fault Tolerance for the Canning DepartmentThe Canning Department uses one server to run the canning conveyor machinery, which operates 24 hours a day. The server has some built-in fault tolerance, such as two network interface cards and battery backup for its power supply. However, no fault tolerance is provided for the single hard drive in the server, which is configured as a basic disk. Fault tolerance is important for this server because the company loses over $15,000 an hour when the conveyor machinery is down. Create a short report with your recommendations for fault tolerance, including general guidelines for setting it up. Case

+1

Answers (1)

Know the Answer?

Brennen Curtis · Answer 1

Check the explanation

Explanation:

When considering the fault tolerant for the canning department some of the guidelines are as follows:

1) To check the reliability of the software

2) To check the redundancy structuring for fault tolerance of the system

3) To check for the reliability oriented designs as well as methods and programming techniques

4) Designing diverse

5) Tools and techniques to be used

6) Reliability of the hardware as well as software.

The current state as well as the actual architecture should be checked so as to ensure that a smooth transitioning is done ...