If 230 VDC is applied to a motor with a resistance of 10 ohms, how much current would be drawn?

Why must air tanks be drained

This is an essential safety procedure that protects workers from injury while working on or near eletrical circuts and equiptment by locking the device and/or power source to prevent anyone

A steel ring with a 2.5000-in. inside diameter at 20.0 ∘C is to be warmed and slipped over a brass shaft with a 2.5020 in. outside diameter at 20.0 ∘C.

Consider a large plane wall of thickness L = 0.4 m, thermal conductivity k = 2.3 W/m·K, and surface area A = 30 m2.

A gas pressure difference is applied to the legs of a U-tube manometer filled with a liquid with specific gravity of 1.7. The manometer reading is 320 mm. What is the pressure difference

An electric motor M is used to reel in cable and hoist a bicycle into the ceiling space of a garage. Pulleys are fastened to the bicycle frame with hooks at location:s A and B, and the motor can reel in cable at a steady rate of 12 in./sec.

In what areas of expertise does NIST offer support?

You are the manager of a firm that produces a product according to the cost function C (qi) = 160 + 58qi - 6qi2 + qi3. Determine the short-run supply function if:

3. In the text, we described a multithreaded file server, showing why it is better than a single-threaded server and a finite-state machine server. Are there any circumstances in which a single-threaded server might be better

A wooden cylinder (0 02 x 0 02 x 0 1m) floats vertically in water with one-third of ts length immersed.