When you are driving in bad weather or bad road
conditions, you should
Follow a little bit closer to the vehicle in front of
you than you normally would.
8
Use one and a half times the following distance
that you use in good conditions.
Use two times the following distance that you
use in good conditions.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “When you are driving in bad weather or bad road conditions, you should Follow a little bit closer to the vehicle in front of you than you ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
In a Series circuit with two identical loads, the voltage across each load will be: A. the same B. 12V each C. higher on the first load in the circuit D. dependent on the current rating of the loads
Answers (1)
Three intermittent switches A; B; C are in a box. Switches A; B and C work 75%, 50% and 25% of the time, respectively. Suppose switches are selected with equal probability from the box.
Answers (1)
Un grupo de trabajadores tenia un rendimiento poco satisfactorio. Elena trabajo varias noches para poner por escrito las metas que deberian cumplir sus subordinados.
Answers (1)
A bus travels the 100 miles between A and B at 50 mi/h and then another 100 miles between B and C at 70 mi/h. The average speed of the bus for the entire 200-mile trip is: a. More than 60 mi/h. b. Equal to 60 mi/h. c. Less than 60 mi/h.
Answers (1)
Frank and his team have developed an ethics module in an AI system that avoids discrimination of people according to their demographics. What ethical concern has Frank addressed? Answer choices: safety management bias law economic impact
Answers (2)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)