Ask Question
27 August, 04:56

A workpiece is fixed in the lathe between two live centers, one center being in the spindle and another in the tailstock quill. What is used in this situation to transfer the torque from the spindle to the workpiece?

a. Collet

b. Chuck

c. Faceplate

d. Dog with a dogplate

e. Mandrel

+5
Answers (2)
  1. 27 August, 06:11
    0
    Option D: Dog with dog plate

    Explanation:

    A lathe dog, also known as a lathe carrier, is a device that clamps around the workpiece and allows the rotary motion of the machine's spindle to be transmitted to the workpiece. A carrier is most often used when turning between centers on a lathe, but it may be used on dividing heads or any similar situation.
  2. 27 August, 08:09
    0
    d. Dog with a dogplate

    Explanation:

    A lathe dog is used when you are working on the live center being the spindle and the dead centre being the tail stock, a lathe dog with a dogplate is mounted to the headstock which tightened the workpieces at one end, and then engages the slot at the other end of the plate to transmit the torque that drives the lathe dog and the workpiece.

    Therefore the lathe dog is used to transfer the torque from the spindle to the workpiece.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “A workpiece is fixed in the lathe between two live centers, one center being in the spindle and another in the tailstock quill. What is ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers