1. When your brakes fail, first try __.

A. pumping the brake pedal

B. holding the brake pedal down

C. pressing the accelerator

D. kicking the brake pedal

g A primary sedimentation basin is designed for an average flow of 0.3 m3/s. The TSS concentration in the influent is 240 mg/L. The average solids removal efficiency of the basin is 60 percent.

In natural convection, the fluid is forced to flow over a surface or in a tube by an external mean such as a pump or a fan. a) - True b) - False

Which of the following would NOT fall into one of the WHMIS 1988 classes?

The Reynolds number is a dimensionless group defined for a fluid flowing in a pipe as Re Durho/μ whereD is pipe diameter, u is fluid velocity, rho is fluid density, and μ is fluid viscosity.

What is the function of deaerator in thermal power plant?

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion