The velocity of a particle along the s-axis is given by v=5s^ (3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2

Define the stress and strength? A material has yield strength 100 kpsi. A cantilever beam has length 10 in and a load of 100 Lbf is applied at the free end. The beam cross section is rectangular 2""x5'.

100 kg of R-134a at 200 kPa are contained in a piston-cylinder device whose volume is 12.322 m3. The piston is now moved until the volume is one-half its original size. This is done such that the pressure of the R-134a does not change.

Name 2 things that change in motion depends on.

If E = 94.2 mJ of energy is transferred when Q = 1.66 C of charge flows through a circuit element, what is the voltage across the circuit element?

A vehicle has individual wheel suspension in the form of helical springs. The free length of the spring lf = 360 mm and the solid length ls = 160 mm at a compressive force of 5000 N. The shear modulus G = 80 GPa.

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion