Sign In
Ask Question
Engineering
Maliyah Roman
27 May, 12:52
Briefly describe how to anneal copper tubing
+5
Answers (
1
)
Moses
27 May, 14:47
0
Great question! Are you useing copper frige tubing if so>
Explanation:
if you are makeing a heater for a fire you are on the right path. Just slowly undo the tubbing. It hint here is slow. I have sometimes used a heat gun to slowly get it apart. Just heat it till in is soft enought to get un done. Then you can use it on a fire to heat water or what ever else you had in mind.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Get an answer to your question ✅
“Briefly describe how to anneal copper tubing ...”
in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
If the sludge concentration in the return sludge line from the secondary clarifier were the same as the MLVSS concentration (XV), would recycle of return sludge increase the SRT?
Answers (1)
The combustion chamber has different shapes depending on the make and model of the engine. True or false
Answers (1)
Calculate the surface temperature of a black surface, 1.6 m^2 in area if the rate of heat transfer is 632 kW. The Stefan-Boltzmann constant is σ = 5.67 x 10^-8 W/m^2 K^4 a) 1734 °C b) 273 °C c) 1625 K d) 1640 K e) 1682 K
Answers (1)
How I do I get nut out of sheets
Answers (2)
An electric winch operates on 140 volts [V] and draws 6 amperes [A] of current. The winch has an efficiency of 64 %. The winch is used to lift an object that weighs 510 pound-force [lb Subscript f ] for 11 seconds [s].
Answers (1)
New Questions in Engineering
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Answers (1)
Home
»
Engineering
» Briefly describe how to anneal copper tubing
Sign In
Sign Up
Forgot Password?