An instrumentation package has a spherical outer surface of diameter D = 100 mm and emissivity ε = 0.25. The package is placed in a large space simulation chamber whose walls are maintained at 77 K. If operation of the electronic components is restricted to the temperature range 40 ≤ T ≤ 85°C, what is the range of acceptable power dissipation for the package? Display your results graphically, showing also the effect of variations in the emissivity by considering values of 0.20 and 0.30.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “An instrumentation package has a spherical outer surface of diameter D = 100 mm and emissivity ε = 0.25. The package is placed in a large ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
2. Determine the surface area of a primary settling tank sized to handle a maximum hourly flow of 0.570 m3/s at an overflow rate of 60.0 m/d. If the effective tank depth is 3.0 m, what is the effective theoretical detention time
Answers (2)
25 An 8-bit computer uses 2's complement to store negative numbers. The range of numbers that can be stored in this computer is ... A) from - 256 to + 256 B) from - 127 to + 127 C) from - 255 to + 256 D) from - 128 to + 127 E) none of the above.
Answers (1)
Which of the following terms describes the amount of time that a vehicle can be operated with its headlights on before battery voltage drops to 10.5V? Group of answer choices ampere-hours rating wattage reserve capacity cold cranking amps
Answers (1)
A steam power plant with a power output of 101.393 MW consumes coal at a rate of 55,309.154 kg/h. If the heating value of 23,888.055 kJ/kg, determine the overall efficiency of this plant. in percent (%) with three decimals.
Answers (1)
Determine the amount of gamma and alpha phases in a 10-kg, 1060 steel casting as it is being cooled to the following temperatures: (a) 900°C; (b) 728°C; and (c) 726°C.
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)