If a 110-volt appliance requires 20 amps, what is the total power consumed?

A closed, rigid tank fitted with a paddle wheel contains 2.0 kg of air, initially at 200oC, 1 bar. During an interval of 10 minutes, the paddle wheel transfers energy to the air at a rate of 1 kW.

2. The vehicle you take the Class E driving skills test in must A. have valid registration B. be no more than 10 years old C. have working fog lights D. be able to exceed 50 mph

Two resistors, with resistances R1 and R2, are connected in series. R1 is normally distributed with mean 65 and standard deviation 10, and R2 is normally distributed with mean 75 and standard deviation 5. a. What is the probability that R2 > R1?

Heat in the amount of 7.5 kJ is added to a closed system while its internal energy decreases by 12 kJ.

What standard feature is on all circular saws? 1. Blade guard 2. Blade-height adjustment 3. Angle-of-cut adjustment 4. All of the above

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion