kg is moving at a speed of 40 km/h on an incline of 1 in 50. The total constant rolling and wind resistance is 600 N. The efficiency of the drive from the engine trough the gearbox to the wheels is 80 % and the gear ratio causes a final engine to wheel velocity ratio of 4:1. The effective wheel diameter is 500 mm. Calculate the engine power to maintain this speed.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “kg is moving at a speed of 40 km/h on an incline of 1 in 50. The total constant rolling and wind resistance is 600 N. The efficiency of the ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Two vehicles arrive at an uncontrolled intersection from different streets at the same time 1. The driver on the right must yield to the vehicle on the left 2. The driver on the left must yield to the vehicle on the right 3.
Answers (1)
A common procedure for measuring the velocity of an air stream involves insertion of an electrically heated wire (called a hot-wire anemometer) into the air flow, with the axis of the wire oriented perpendicular to the flow direction.
Answers (1)
A particle moves along a straight line such that its acceleration is a = (4t^2-2) m/s, where t is in seconds. When t = 0, the particle is located 2 m to the left of the origin, and when t = 2, it is 20 m to the left of the origin.
Answers (1)
In Illinois, once a person has obtained their boating education certificate what is the minimum age to operate a motorized vessel without adult supervision?
Answers (1)
The capacitor can withstand a peak voltage of 600 volts. If the voltage source operates at the resonance frequency, what maximum voltage amplitude VmaxVmaxV_max can the source have if the maximum capacitor voltage is not exceeded?
Answers (2)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)