1. What effect does friction have on a flexible system?

An autoclave contains 1000 cans of pea soup. It is heated to an overall temperature of 100°C. If the cans are to be cooled to 40°C before leaving the autoclave, how much cooling water is required if it enters at 15°C and leaves at 35°C?

What is the pitch circle diameter of a 50-tooth spur gear having a circular pitch of 0.375 inch

A viscous fluid flows in a 0.10-m-diameter pipe such that its velocity measured 0.012 m away from the pipe wall is 0.8 m/s. If the flow is laminar, determine the centerline velocity and the flowrate.

What are the mechanisms of energy transfer in an open system?

What are the air-standard assumptions?

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion