Ask Question
EngineeringEngineering
19 September, 05:59

The pressure of a car can be adjusted using what

+3
Answers (1)
  1. 19 September, 06:07
    0
    tyre pressure monitoring system (TPMS)

    Explanation:

    It very important to inflate your tyres to the specified pressure. So cultivate a habit to check and refill them once a month. Note that you can't tell if a tyre is underinflated just by looking at it. If it actually looks underinflated in a way. And you can't really rely on a tyre pressure monitoring system (TPMS) only to keep track. Most systems only warn you when the pressure is 25 percent below the manufacturer's recommended tyre pressure.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “The pressure of a car can be adjusted using what ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Under which classification of convection would one expect the heat transfer con highest? a) - Forced b) - Mixed c) - Natural (or Free)
Answers (1)
The concentration of carbon monoxide (co) in an exhaust gas is 1x10^4 ppmv. what is the concentration in mg/m^3 at 25 and 1 atm
Answers (1)
A coal-fired power plant equipped with a SO2 scrubber is required to achieve an overall SO2 removal efficiency of 85%. The existing scrubber is 95% efficient.
Answers (1)
A heat engine receives heat from a source at 1000∘C and rejects the waste heat to a sink at 50∘C. If heat is supplied to this engine at a rate of 100 kJ/s, the maximum power this heat engine can produce is (a) 25.4 kW (b) 55.4 kW (c) 74.6 kW (d) 95.
Answers (1)
Write two scnr. nextInt statements to get input values into birthMonth and birthYear. Then write a statement to output the month, a slash, and the year. End with newline. The program will be tested with inputs 1 2000 and then with inputs 5 1950.
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)
Home » Engineering » The pressure of a car can be adjusted using what
Sign Up Forgot Password?