Engineering

Kyra Santana

1 April, 13:01

A cylinder with a 0.25 m inner diameter and a 0.43 m outer diameter is internally pressurized to 175 MPa. a) Determine the maximum shear stress at the outer surface of the cylinder. b) Using DET, determine the equivalent stress in the cylinder.

+3

Answers (1)

Know the Answer?

Not Sure About the Answer?

Get an answer to your question ✅ “A cylinder with a 0.25 m inner diameter and a 0.43 m outer diameter is internally pressurized to 175 MPa. a) Determine the maximum shear ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.

Search for Other Answers

You Might be Interested in

What should you following distance be at night

Define Plastic vs elastic deformation.

In a vapour absorption refrigeration system, the compressor of the vapour compression system is replaced by a a) - absorber, generator and liquid pump. b) - absorber and generator. c) - liquid pump. d) - generator.

A steel bar 100 mm (4.0 in.) long and having a square cross section 20 mm (0.8 in.) on an edge is pulled intension with a load of 89,000 N (20,000 lbf), and experiences an elongation of 0.10 mm (4.0 x 10^-3 in.).

Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) motion detector. The distance between the person and the PIR detector is 5 m. The PIR detector sensor is 3 cm x 1 cm in size.

New Questions in Engineering

Though still is on the margins of the global agro-food system, organic farming practices are on the rise in the core. In growing crops and raising livestock organically, which of the following are permitted? composted cow manure

Technician A says that a magnetic field can be created by current flow. Technician B says that current can be induced by moving a wire through a magnetic field. Who is right?

9.17 LAB: Name format Many documents use a specific format for a person's name. Write a program whose input is: firstName middleName lastName, and whose output is: lastName, firstName middleInitial.

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder