Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Describe three advantages and three disadvantages of JIT? ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
You need to display output for all of the values between the starting and ending values. First two values are temperatures in Fahrenheit. You need to display all of the values from the first temperature to the last temperature.
Answers (1)
In a piece of aluminum you want to make a pocket (milling of cavities), an end mill tool of 6 mm in diameter and 4 cutting sides will be used, the height of the cutting sides of the tool is 25 mm. The feed that will be taken per tooth will be 0.
Answers (1)
A) The current that goes through a 100 mH inductor is given as i (t) = 6 - 2e^-2t A t > = 0 Find the voltage v (t) across the inductor. b) The voltage v (t) = 5sin (5t) V is applied across the terminals of a 200 mH inductor.
Answers (1)
Whats are the best choice of cooling towers for electeic generating power plant and why?
Answers (1)
A copper alloy cylinder 1.17 m long with a diameter of 32.39 mm is subjected to a tensile stress of 1,302 psi along its length. Assuming this applied stress is purely elastic calculate the diameter, in mm, of the cylinder under this load.
Answers (1)
New Questions in Engineering
Two elements Aluminum and chrome are being consider use in making solid solution alloy with gold. which element will the better candidate if high solid solubility is desire
Answers (1)
You just purchased a 400-L rigid tank for a client who works in the gas industry. The tank is delivered pre-filled with 3 kg of air at a temperature of 25C.
Answers (1)
Problem 4: Air flows into an open system and carries energy at the rate of 100 kW. When the air leaves the system, the energy rate it carries is 250 KW. In the meantime, the system receives 350 kW power and negligible heat flux.
Answers (1)
A product has a market estimate of 180,500 components and requires three processing steps (turning, milling, and drilling), having defective estimates of d1=0.06, d2=0.04, d3=0.01.
Answers (1)
The energy conversion that takes place in an evaporative cooler is: a. thermal energy to chemical energy b. thermal energy to heat c. cooling of thermal energy d. heat energy to mechanical energy
Answers (1)