Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Explain the use of the Kanban system in a production line? ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
A compensator is a control system that regulates another system, usually by conditioning the input or the output to that system. O True O False
Answers (1)
At many intersections, under certain circumstances, a right turn may be made while the traffic light is red. Before turning right: A.) Come to a complete stop, look both ways, and yield the right of way to pedestrians and oncoming traffic. B.
Answers (1)
Any one here play animal crossing new horizons if so wanna play
Answers (1)
Determine the temperature, in K, of 5 kg of air at a pressure of 0.3 MPa and a volume of 2.2 m3. Ideal gas behavior can be assumed for air under these conditions.
Answers (1)
1. Given that increased temperature will (all things being equal), decrease the amount of pressure required to extrude at a given rate; what limits increasing this process variable to increase process speed? 2.
Answers (1)
New Questions in Engineering
The loss of power a signal suffers as it travels from the transmitting computer to a receivingcomputer is: a. white noiseb. spikingc. attenuation d. intermodulation noisee. echo
Answers (1)
Compared to 15 mph on a dry road, about how much longer will it take for you to stop at 30 mph on a snow-covered road? 2 to 3 times 4 to 6 times 8 to 10 times
Answers (1)
Explain under what circumstances earthworm channels might increase downward saturated water flow, but not have much effect on the leaching of soluble chemicals applied to the soil.
Answers (1)
The hot combustion gases of a furnace are separated from the ambient air and its surroundings, which are at 25 oC, by a brick wall 0.15 m thick. The brick has a thermalconductivity of 1.2 W/m. K and a surface emissivity of 0.8.
Answers (1)
Which of the following statements do not correctly describe pull manufacturing? (1). Material flow is determined by the need of the downstream workstation (2). Control is transferred from the beginning of the line to the end (3).
Answers (1)