Sign In
Ask Question
Engineering
Rayne House
24 February, 01:19
List the 6 steps used in the Buckingham Pi method
+2
Answers (
1
)
Jensen Graham
24 February, 01:42
0
The steps in Buckingham π method are as follows:
Step 1: List the all variables = m
Step 2 : Express each variables in fundamental units (M, L, T,θ) = n
Step 3 : Find m - n numbers of π terms
Step 4 : Select repeating variables which have all basic dimensions.
Step 5 : Creates π terms.
Step 6 : Repeat step 5 for all other variables.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Get an answer to your question ✅
“List the 6 steps used in the Buckingham Pi method ...”
in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
What are the main renewable energy sources? Why are ocean, wave, and tidal energies not considered as main renewable sources?
Answers (1)
What is the mass in both slugs and kilograms of a 1000-lb beam?
Answers (1)
Polymers can be natural or synthetic. a) - True b) - false?
Answers (1)
The yield strength of mild steel is 150 MPa for an average grain diameter of 0.038 mm; yield strength is 250 MPa for average grain diameter 0.009 mm. What is the yield strength for the same steel having an average grain diameter 0.
Answers (1)
A water reservoir contains 108 metric tons of water at an average elevation of 84 m. The maximum amount of electric energy that can be generated from this water is: 8 kwh, 16 kwh, 1630 kwh, 16300 kwh or 58800 kwh.
Answers (1)
New Questions in Engineering
The value of the critical Reynolds number for the flow over a flat plate is 5 x10^5. The significance of the value is: (a) The boundary layer will be turbulent where the Reynolds number is less than this value.
Answers (1)
The specifications of an electronic device are 24 / - 0.4 Amps. When the device exceeds specifications the average quality cost is $32.00. A sample of the devices had an average value of 23.9 Amps and a standard deviation of 0.211 Amps.
Answers (1)
A vacuum gauge indicates that the pressure of air in a closed chamber is 02 bar (vacuum) The pressure of the surrounding atmosphere is equivalent to 750 in of mercury The density of mercury is 13.95 g / cn and the acceleration of gravity is 9.8.
Answers (1)
The Reynolds number for flow over a fixed horizontal flat plate is constant throughout its length. a) True b) False
Answers (1)
Briefly describe the function of the thermostatic expansion valve in a vapour compression refrigeration system
Answers (1)
Home
»
Engineering
» List the 6 steps used in the Buckingham Pi method
Sign In
Sign Up
Forgot Password?