Ask Question
EngineeringEngineering
17 September, 17:42

Technician A says that analog scopes use an LCD display. Technician B says that digital scopes may use a CRT display. Which technician is correct?

A. Technician A only

B. Technician B only

C. Both Technician A and Technician B

D. Neither Technician A nor Technician B

+3
Answers (1)
  1. 17 September, 17:58
    0
    Option B

    Technician B only

    Explanation:

    For analog scopes, they display all voltages without taking samples hence don't use LCD but digital scopes can use CRT for display and the display shows one horizontal line above the zero line. Therefore, technician B is correct.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Technician A says that analog scopes use an LCD display. Technician B says that digital scopes may use a CRT display. Which technician is ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.
Answers (1)
If a worksite includes more than one set of management and workers, who should have access to the information, training, and controls needed to avoid workplace accidents?
Answers (2)
A vacuum gauge indicates that the pressure of air in a closed chamber is 02 bar (vacuum) The pressure of the surrounding atmosphere is equivalent to 750 in of mercury The density of mercury is 13.95 g / cn and the acceleration of gravity is 9.8.
Answers (1)
Listed below are the results of measurements taken on several different junction diodes. For each diode, the data provided are the diode current I and the corresponding diode voltage V.
Answers (1)
Same rule: If both players spend the same number of coins, player 2 gains 1 coin. Off-by-one rule: If the players do not spend the same number of coins and the positive difference between the number of coins spent by the two players is 1, player 2
Answers (1)
New Questions in Engineering
Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L.
Answers (1)
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
Home » Engineering » Technician A says that analog scopes use an LCD display. Technician B says that digital scopes may use a CRT display. Which technician is correct? A. Technician A only B. Technician B only C. Both Technician A and Technician B D.
Sign Up Forgot Password?