Semiconductors are primarily used in? 1) electromechanical controls 2) electronic controls 3) pneumatic controls

An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.

If a worksite includes more than one set of management and workers, who should have access to the information, training, and controls needed to avoid workplace accidents?

A vacuum gauge indicates that the pressure of air in a closed chamber is 02 bar (vacuum) The pressure of the surrounding atmosphere is equivalent to 750 in of mercury The density of mercury is 13.95 g / cn and the acceleration of gravity is 9.8.

Listed below are the results of measurements taken on several different junction diodes. For each diode, the data provided are the diode current I and the corresponding diode voltage V.

Same rule: If both players spend the same number of coins, player 2 gains 1 coin. Off-by-one rule: If the players do not spend the same number of coins and the positive difference between the number of coins spent by the two players is 1, player 2

Familiarity with basic fastener properties: For each of the standard fasteners specified informally below, determine the major diameter d, the pitch p, the pitch diameter dp, and the bolt length L.

The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius

Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.

What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution

The controller can be considered the brain of closed loop system