Sign In
Ask Question
Engineering
Jayvon Page
8 February, 05:29
What are the two types of pumps in compressors?
+4
Answers (
2
)
Jakobe Leonard
8 February, 06:04
0
Answer: The two different types of pumps in compressors are:
1) Centrifugal Pumps
2) Reciprocating Pumps
Explanation:
Compressor is defined as a mechanical device which increases the gas pressure by reducing its volume. The main action of a pump is to transport liquids and pressurize and it coverts rotational energy. As, centrifugal pumps are the most common pumps used for transfer of fluids and it works on simple mechanism.
Reciprocating Pumps is used for low volumes of flow at a high pressure. It is the positive displacement pump. As, it works on the principle of pushing of liquid which executes a reciprocating motion in a closed cylinder.
Comment
Complaint
Link
Victoria Benson
8 February, 07:58
0
Centrifugal Pumps and Positive Displacement Pumps
Explanation:
The two of pumps listed above is based on the mode of operation. The centrifugal pumps works by increasing the velocity of the liquid through the machine while the displacement pumps works by alternating, filling a cavity and then displace some amount of liquid.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Get an answer to your question ✅
“What are the two types of pumps in compressors? ...”
in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
A bar is subjected to an axial load of magnitude 1,037 lbs. It is determined that the Margin of Safety (MS) is equal to 0.28. What is the magnitude of the applied load so that (MS = 0).
Answers (1)
Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.
Answers (1)
A floor system has W24 x 55 sections spaced 8'-0"" o. c. supporting a floor dead load of 50 psf and a live load of 80 psf. Determine the governing load. Show all work.
Answers (1)
What should you following distance be at night
Answers (1)
Who are Emily Arden's backup singers? 1. the goodtones 2. the fairtones 3. the piglets 4. the smoothtones this is for theater
Answers (2)
New Questions in Engineering
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Answers (1)
Home
»
Engineering
» What are the two types of pumps in compressors?
Sign In
Sign Up
Forgot Password?