Ask Question
EngineeringEngineering
14 April, 18:19

The stress is in the part working with static load. A. Dynamic stress B. Static stress or dynamic stre C. Static stress

+3
Answers (1)
  1. 14 April, 18:46
    0
    Answer: C) Static stress

    Explanation: Static load is the load that is defines as being same over a period of time and not getting changed. So, if there is any force or stress on the body it won't be able to change the position or magnitude of it. Therefore the stress that is being applied on the static load so that body is stable is the static stress. Thus the correct option is option (c).
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “The stress is in the part working with static load. A. Dynamic stress B. Static stress or dynamic stre C. Static stress ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Recall that I format instruction include Rs and Rt fields. When executing an LW instruction, is the memory address computed using the Rs or Rt fields?
Answers (1)
Which is a reason that teen might choose to focus on a friendship and not a romantic relationship A to be like everybody else B to avoid having distractions C to develop conflict resolution skills D to increase social ranks
Answers (2)
For problems 1 and 2, six luminaires, similar to Style E used in the Commercial Building, are to be installed in a room that is 12 ft * 18 ft (∼3.7 m * ∼5.5 m) with a 9 ft (2.8 m) floor-to-ceiling height. The spacing ratio for the luminaire is 1:0.
Answers (1)
What is the viscosity of air at a pressure of 100 kPa and a temperature of 5°C and at 100°C?
Answers (1)
Determine whether the statement below is true or false Consider the following events: Event A The survey respondent is less than 40 years old Event B The survey respondent is 40 years or older.
Answers (1)
New Questions in Engineering
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Answers (1)
Home » Engineering » The stress is in the part working with static load. A. Dynamic stress B. Static stress or dynamic stre C. Static stress
Sign Up Forgot Password?