Ask Question
EngineeringEngineering
30 October, 17:34

What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility

+5
Answers (1)
  1. 30 October, 19:05
    0
    Therefore, the options a) - to transfer stress to the other phases b) - to protect phases from environment, are both correct.

    Explanation:

    A composite material is made by mixing two or more materials of different physical and chemical properties. The characteristics of the resulting composite material is different from the properties of the constituting materials.

    The two main constituting phases of a composite material is the binder or the matrix and the dispersed phase (reinforcement).

    The main function of matrix in a composite is to protect the fibers from any environmental damage and transfer stress to the other reinforcement phase.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
For a signal that is time limited to 10 ms and has an essential bandwidth of 10 KHz, determine, the number of signal samples necessary to compute a power-of-2 FFT with a frequency resolution of 50 Hz. Explain whether any zero padding is necessary.
Answers (1)
A three-phase, Y-connected, 75MVA, 27kV synchronous generator has a synchronous reactance of 9.0/phase. Using rated MVA and voltage as the base values, determine the per-unit reactance. Then refer this per-unit value to a 100-MVA, 30kV base.
Answers (1)
Cylinder cushions at the ends of the cylinder speeds the piston up at the end of the stroke. a) - True b) False
Answers (1)
A payload is to be delivered by airdrop. The vertical velocity at landing has to be less than 7m/s. The total weight of the payload and parachute system is 400kg. Determine the minimum diameter of the open parachute, assuming a drag coefficient Cd 1.
Answers (1)
A three-phase transformer bank consists of 3 single-phase transformers to handle 400 kVA witha 34.5kV/13.8kV voltage ratio.
Answers (1)
New Questions in Engineering
The controller can be considered the brain of closed loop system
Answers (1)
What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Answers (1)
Our goal is to design a traffic-light controller with the following properties; it lights up the green light (output G) for 15 seconds, followed by the yellow light (output Y) for 9 seconds, then the red light (output R) for 12 seconds.
Answers (1)
A 25-kg cast-iron wood-burning stove contains 5kg of soft pine wood and 1 kg of air. All the masses are at room temperature, 20 degree C, and pressure, 101 kPa. The wood now burns and heats all the mass uniformly, releasing 1500W.
Answers (1)
The power supply converts the wall outlet AC power into DC power. T or F
Answers (1)
Home » Engineering » What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Sign Up Forgot Password?