2. When entering a vehicle from the street side,

you should

(a) be ready to unlock the door.

(b) walk around the front of the vehicle

toward the back.

(c) get in quickly, then close and lock the door.

(d) all of the above

Draw a temperature-entropy (T-s) diagram for the power cycle. Indicate the above-mentioned major components on the diagram.

21.4 An inspector's accuracy has been assessed as follows: p1 = 0.96 and p2 = 0.60. The inspector is given the task of inspecting a batch of 500 parts and sorting out the defects from good units. If the actual defect rate in the batch is 0.

I have a 500 L tank that can hold a fluid. How much heavier or lighter will the tank be if a. The tank holds water at 80C compared to if the water tank holds 5C water? b.

2. The metal to be welded is called the

What process does a professional use to find an object's position with respect to the camera? A. segmentation B. pose estimation C. detection D. tracking E. egomotion

The controller can be considered the brain of closed loop system

What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility

Our goal is to design a traffic-light controller with the following properties; it lights up the green light (output G) for 15 seconds, followed by the yellow light (output Y) for 9 seconds, then the red light (output R) for 12 seconds.

A 25-kg cast-iron wood-burning stove contains 5kg of soft pine wood and 1 kg of air. All the masses are at room temperature, 20 degree C, and pressure, 101 kPa. The wood now burns and heats all the mass uniformly, releasing 1500W.

The power supply converts the wall outlet AC power into DC power. T or F