A 35-pound force is applied to a 3-inch cylinder with a 6-inch stroke. What is the power produced by the cylinder that moves its full stroke in 0.7 s?

When you are forwarding-bias a diode with a digital VOM, the red test lead should be placed on which lead of the diode? a. Anode B. Calthode c. Emitter D. Drain

A community plans to build a facility to convert solar radiation to electrical power. The community requires 2.80 MW of power, and the system to be installed has an efficiency of 30.0% (that is, 30.

piston cylinder has 5kg water at 500kPa and 300c. Heated by 100V and 4A that operates for 500 secs. It's cooled to a saturated liquid. what is the boundary work and heat lost?

A roller support acts like a contact boundary condition as it can produce a reaction force as a push response to a body but will not produce a pull force to hold a body from moving away. a) True b) - False

Write a function which multiplies the values in odd position values by 10. Odd positions in this case refers to the first value in the list, the third value, the fifth value etc

At steady state, a power cycle having a thermal efficiency of 38% generates 100 MW of electricity while discharging energy by heat transfer to cooling water at an average temperature of 70 F.

What is the definition of a fluid?

You are ordering steel cable for a 250 foot long zip-line you are building in your back yard. The cable can be ordered in diameters with 1/16 inch increments. (1/16, 1/8, 3/16, 1/4, 5/16, 3/8, etc.

Which of the following statements is LEAST-Likely true? A) Do not attempt to unseat the beads of an inflated tire. B) Do not strike the tire or rim with a hammer. C) A hammer is sometimes necessary when removing a passenger car tire.

What is the pitch circle diameter of a 50-tooth spur gear having a circular pitch of 0.375 inch