Which of the following is not a responsibility of a fire watch?
Maintain fire extinguishing equipment on-hand and be trained in its use.
Be familiar with facility alarms and procedures in the event of a fire.
Completing tasks not related to fire watch duty in the work areas
Maintain a watch for at least a half hour after completion of welding operations
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Which of the following is not a responsibility of a fire watch? Maintain fire extinguishing equipment on-hand and be trained in its use. Be ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
5 kg of steam contained within a piston-cylinder assembly undergoes an expansion from state 1, where the specific internal energy is u1 = 2709.9 kJ/kg, to state 2, where u2 = 2659.6 kJ/kg.
Answers (1)
Helium in a steel tank is at 250 kPa, 300 K with a volume of 0.1m3. It is used to fill a balloon of helium. When thetank pressure drops to 150 kPa, the flow of helium stops by itself.
Answers (1)
In a two-stroke engine, a) the crankcase is sealed b) the outward motion of piston is used to pressurize the air-fuel misture e) the intake and exhaust valves are replaced by opening in lower part or cylinder wall d) all of the mentioned
Answers (1)
Consider a 50-mH inductor. a. Express the voltage across the inductor and then evaluate it at t = 0.25 s if iL (t) = 5e - 2t + 3te-2t - 2 A. Be certain to simplify your expression.
Answers (1)
Internal flow is one in which the flow is not bounded. a) True b) False
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)