Ask Question
11 June, 19:38

A structural component in the shape of a flat plate 24.2 mm thick is to be fabricated from a metal alloy for which the yield strength and plane strain fracture toughness values are 545 MPa and 20.0 MPa-m1/2, respectively. For this particular geometry, the value of Y is 1.0. Assuming a design stress of 0.2 times the yield strength, calculate the critical length of a surface flaw.

+3
Answers (1)
  1. 11 June, 21:40
    0
    ac = 0.01071 m = 10.71 mm

    Explanation:

    Given:-

    - The thickness of plate, t = 24.2 mm

    - The yield strength of metal alloy, σy = 545 MPa

    - The fracture toughness, Kic = 20.0 MPa-√m

    - The geometrical criticality, Y = 1.0

    - Factor of design, nd = 0.2

    Find:-

    Calculate the critical length of a surface flaw

    Solution:-

    - We are to determine the minimum critical length (ac) for the design stress (σd) that leads to failure of the plate with thickness (t).

    - The relation for the critical length (ac) depends on the material intrinsic properties i. e Fracture toughness - (Energy required for the material to fracture) and the design yield strength (σd = nd*σy).

    - The relation is given below:

    ac = [ Kic / Y*σd ] ^2 * (1 / π)

    ac = [ Kic / Y*σy*nd ] ^2 * (1 / π)

    ac = [ 20.0*5 / 1*545 ] ^2 * (1 / π)

    ac = 0.01071 m = 10.71 mm

    Answer: The minimum critical length (ac) for the metal alloy subjected to the given design stress is (10.71 mm) for fracture.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “A structural component in the shape of a flat plate 24.2 mm thick is to be fabricated from a metal alloy for which the yield strength and ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers