What are the input and output gears of a bike and their movements?

5. The sizes of doors and windows are found where in most residential prints?

A pin-supported structure has unrestrained rotations at the support locations. a) True b) False

The in situ moist unit weight of a soil is 17.3 kN/m3 and the moisture content is 16%. The specific gravity of soil solids is 2.72. This soil is to be excavated and transported to a construction site for use in a compacted fill.

A cylindrical water-storage tank has a height of 7.7 m and a radius of 6.0 m. The storage tank is full of water but is vented to the atmosphere. The bottom of the tank is 26 m off the ground.

How much time does it take a freezer to make a tray of ice cubes out of a tray of 0.25kg liquid water at 10 Celsius). Assume the freezer is a constant cycle operating between-8 (Celsius) and 35 (Celsius) with a power requirement of 750 N.

5) A 80-kg man has a total foot imprint area of 480 cm2. Determine the pressure this man exerts on the ground if (a) he stands on both feet and (b) he stands on one foot.

A car with an initial speed of 50 km/h accelerates at 5000 km/h2 along a straight road. a. How long will it take to reach a speed of 120 km/h?

If high beam headlights are used improperly, it could cause glare for an oncoming driver or reduce their visibility greatly, increasing the possibility of a collision. a) b) True False

The value of the critical Reynolds number for the flow over a flat plate is 5 x10^5. The significance of the value is: (a) The boundary layer will be turbulent where the Reynolds number is less than this value.

The specifications of an electronic device are 24 / - 0.4 Amps. When the device exceeds specifications the average quality cost is $32.00. A sample of the devices had an average value of 23.9 Amps and a standard deviation of 0.211 Amps.