In order to protect eyes from damaging near ultraviolet light (UVA with wavlength of 329 nm), sunglasses are often coated so this light is reflected. The index of refraction of the plastic coating is 1.39, the index of refraction of the glass this coating is placed on is 1.59 and the thickness of the glass is 1.97 mm. What thickness coating should be used
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “In order to protect eyes from damaging near ultraviolet light (UVA with wavlength of 329 nm), sunglasses are often coated so this light is ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Which size of impurity atom, smaller impurity atom or larger impurity atom, when located near a dislocation, will nullify some of the compressive strain of a dislocation in a crystal? Why?
Answers (1)
An orthogonal cutting operation is being carried out under the following conditions: depth of cut = 0.1 mm, width of cut = 5 mm, chip thickness = 0.2 mm, cutting speed = 1.5 m/s, rake angle = 15o, cutting force = 400 N, and thrust force = 200 N.
Answers (1)
the correlation between a car's engine size and its fuel economy is r = - 0.774. what fraction of the variability in fuel economy is accounted for by the engine size?
Answers (1)
While it seems rather than obvious that engineers need to consider the end user, how might this perspective get lost in the design process? critical thinking question
Answers (1)
Thread cancellation is : Group of answer choices c) the task of terminating a thread before it has completed a) the task of destroying the thread once its work is done b) the task of removing a thread once its work is done d) none of the mentioned
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)