Engineering » Page 2

Engineering

Camden Stein

If a vehicle is equipped with radial tires, the tires should be mounted on which thing?

Answer Answers (1)

Engineering

Pecan

4. Porcelain enamel is sometimes referred to as A. "glass lining" B. kaolin C. vitreous enamel D. Both A and C.

Answer Answers (1)

Engineering

Buchanan

In casting experiments performed using a certain alloy and type of sand mold, it took 155 sec for a cube-shaped casting to solidify. The cube was 50 mm on a side. (a) Determine the value of the mold constant Cm in Chvorinov's Rule. (b) If the same alloy and mold type were used, find the total solidification time for a cylindrical casting in which the diameter is 30 mm and length is 50 mm.

Answer Answers (1)

Engineering

Nathanael Doyle

The maximum stress in a section of a circular tube subject to a torque is τmax = 22 MPa. If the inner diameter is Di = 3.75 cm and the outer diameter is Do = 5.5 cm, what is the torque on the section? Express your answer with appropriate units to three significant figures. View Available Hint (s)

Answer Answers (1)

Engineering

Madeleine Li

Choose the true statement from those shown below: A Merchant Account allows you to use SSL on your web site. Disadvantages of using an instant online storefront for your e-commerce site include limited templates and potential limits on the number of products that can be sold. Instant storefronts are what most large-scale E-Commerce sites use. None of the above is true

Answer Answers (1)

Engineering

Hadley

Though still is on the margins of the global agro-food system, organic farming practices are on the rise in the core. In growing crops and raising livestock organically, which of the following are permitted?

composted cow manure

Answer Answers (1)

Engineering

Maribel Thomas

Technician A says that a magnetic field can be created by current flow. Technician B says that current can be induced by moving a wire through a magnetic field. Who is right?

Answer Answers (1)

Engineering

Angie Landry

9.17 LAB: Name format Many documents use a specific format for a person's name. Write a program whose input is: firstName middleName lastName, and whose output is: lastName, firstName middleInitial. Ex: If the input is: Pat Silly Doe the output is: Doe, Pat S. If the input has the form firstName lastName, the output is lastName, firstName. Ex: If the input is: Julia Clark the output is: Clark, Julia

Answer Answers (1)

Engineering

Max Mendoza

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature. (a) How long will it take for the austenite-to-pearlite reaction to go to 50% completion? To 100% completion? (b) Estimate the hardness of the alloy that has completely transformed to pearlite.

Answer Answers (1)

Engineering

Zachariah Palmer

The rotor in a shaded pole motor consists of

A coils energized by alternating current

B a short circuited loop of copper wire

c a permanent magnet

D an iron cylinder

Answer Answers (1)

Engineering

Guest

What factors are likely to promote the formation of stress corrosion cracks?

Answer Answers (1)

Engineering

Paris Acosta

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Answer Answers (2)

Engineering

Manuel Richard

Which process must first take place in order for the proteins in foods to be used by body cells?

(1) digestion (3) synthesis

(2) storage (4) excretion

Answer Answers (1)

Engineering

Haven Buchanan

An open tank contains brine to a depth of 2 m and a 3-m-layer of oil on top of the brine. Density of brine is 1,030 kg/m3 and the density of oil is 880 kg/m3. What is the gage pressure (kPa) at the bottom of the tank?

Answer Answers (1)

Engineering

Hodge

Michelle is the general manager of a power plant. This morning, she will meet with city officials to discuss environmental issues. After the meeting, she will confer with the plant's section managers to address the concerns of the city representatives. This afternoon, Michelle will meet with a team leader to go over a complaint filed by an employee. After the complaint meeting, Michelle plans to spend time in the library and on the Internet researching new technologies that can be used to improve the performance of her plant. Which type of management skill does Michelle use most during the day?

Answer Answers (1)