The aluminum alloy (2024-t6) absorber plate is 6 mm thick and well insulated on its bottom. the top surface of the plate is separated from a transparent cover plate by an evacuated space. the tubes are spaced a distance / of 0.20 m from each other, and water is circulated through the tubes to remove the collected energy. the water may be assumed to be at a uniform temperature of 7z 60c. under steady-state operating conditions for which the qhw radiation heat flux to the surface is trad 800 w/m2, what is the maximum temperature on the plate and the heat transfer rate per unit length of tube? note that trad represents the net effect of solar radiation absorption by the absorber plate and radiation exchange between the absorber and cover plates. you may assume the temperature of the absorber plate directly above a tube to be equal to that of the water.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “The aluminum alloy (2024-t6) absorber plate is 6 mm thick and well insulated on its bottom. the top surface of the plate is separated from ...” in 📙 Physics if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
A man inside an insulated metallic cage does not receive shock when the cage is highly charge. explain.
Answers (1)
The jamaican bobsled team hit the brakes on their sled so that it decelerates at a uniform rate of 0.43 m/s, how long does it take to stop if it travels 85 m before coming to rest
Answers (1)
A box is moved 2m across the floor with a force of 16n. How much work was done?
Answers (1)
As temperature increases, what happens to the density of ocean water? A. changes unpredictably B. decreases C. does not change D. increases
Answers (1)
Does using oxygen to separate molten copper sulphide into copper and sulphur dioxide count as a physical change
Answers (1)
New Questions in Physics
At a certain factory, 340 kg crates are dropped vertically from a packing machine onto a conveyor belt moving at 1.00 m/s. (A motor maintains the belt's constant speed.) The coefficient of kinetic friction between belt and crate is 0.400.
Answers (1)
A hydraulic lift is used to lift a heavy box that is pushing down on a 1.5-m2 piston with a force of 1,700 N. What force needs to be exerted on a 0.12-m2 piston to lift the box?
Answers (1)
Rauol's friend Johnny sets out from his house in the city. His displacement is 900 m 80° North of west. What is the x component of his displacement vector?
Answers (1)
What is the relationship between gravity and mass? What is the relationship between gravity and distance?
Answers (2)
A person performs 300 j of work over the course of 60 seconds how much power they did required
Answers (1)