Engineering

Melissa Best

20 April, 05:02

What are the weight restrictions for a small UAS, including everything onboard at the time

of takeoff? (Circle the correct answer)

(A) GTOW greater than. 55 lbs. and less than 55 lbs.

B. GTOW greater than 5 lbs. and less than 50 lbs.

on to fly a UAS. The

+4

Answers (1)

Know the Answer?

Not Sure About the Answer?

Get an answer to your question ✅ “What are the weight restrictions for a small UAS, including everything onboard at the time of takeoff? (Circle the correct answer) (A) GTOW ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.

Search for Other Answers

You Might be Interested in

The basic barometer can be used to measure the height of a building. If the barometric readings at the top and the bottom of a building are 675 and 695 mm Hg, respectively, determine the height of the building in m.

The velocity of a particle along the s-axis is given by v=5s^ (3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2

The activation energy for diffusion in BCC iron is 84 kJ/mol. Which of the following explains why the carbide precipitation activation energy is slightly higher than the BCC diffusion activation energy? a.

When using the "method of sections" to solve a truss problem, a "slice" can pass through at most how many unknown members? a. 0 b. 1 c. 2 d. 3

Unlike expendable molds, permanent molds do not collapse, so the mold must be opened before appreciable cooling contraction occurs in order to prevent cracks from developing in the casting: True or False

New Questions in Engineering

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion