What process does a professional use to find an object's position with respect to the camera?

A. segmentation

B. pose estimation

C. detection

D. tracking

E. egomotion

The temperature of a system rises by 10 °C during a heating process. Express the rise in temperature of K, R, and °F.

Determine the amount of gamma and alpha phases in a 10-kg, 1060 steel casting as it is being cooled to the following temperatures: (a) 900°C; (b) 728°C; and (c) 726°C.

Suppose the measured background level is 5.1 mV. A signal of 20.7 mV is measured at a distance of 29 mm and 15.8 mV is measured at 32.5 mm. Correct the data for background and normalize the data to the maximum value.

An instrumentation package has a spherical outer surface of diameter D = 100 mm and emissivity ε = 0.25. The package is placed in a large space simulation chamber whose walls are maintained at 77 K.

When they say in the United States that a car's tire is filled "to 32 lb," they mean that its internal pressure is 32 lbf/in² above the ambient atmosphere. If the tire is at sea level, has a volume of 3.0 ft³, and is at 75°F.

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion