Ask Question
EngineeringEngineering
3 April, 11:11

What is the slump test

+4
Answers (1)
  1. 3 April, 15:09
    0
    Slump Test

    Explanation:

    1. The slump test is a means of assessing the consistency of fresh concrete. It is used, indirectly, as a means of checking that the correct amount of water has been added to the mix.

    2. Concrete slump test is carried out from batch to batch to check the uniform quality of concrete during construction. The slump test is the most simple workability test for concrete, involves low cost and provides immediate results. Due to this fact, it has been widely used for workability tests since 1922.

    3. Slump test is the most commonly used method of measuring consistency of concrete which can be employed either in laboratory or at site of work ... In case of a shear slump, the slump value is measured as the difference in height between the height of the mould and the average value of the subsidence.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “What is the slump test ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Recall that I format instruction include Rs and Rt fields. When executing an LW instruction, is the memory address computed using the Rs or Rt fields?
Answers (1)
Which is a reason that teen might choose to focus on a friendship and not a romantic relationship A to be like everybody else B to avoid having distractions C to develop conflict resolution skills D to increase social ranks
Answers (2)
For problems 1 and 2, six luminaires, similar to Style E used in the Commercial Building, are to be installed in a room that is 12 ft * 18 ft (∼3.7 m * ∼5.5 m) with a 9 ft (2.8 m) floor-to-ceiling height. The spacing ratio for the luminaire is 1:0.
Answers (1)
What is the viscosity of air at a pressure of 100 kPa and a temperature of 5°C and at 100°C?
Answers (1)
Determine whether the statement below is true or false Consider the following events: Event A The survey respondent is less than 40 years old Event B The survey respondent is 40 years or older.
Answers (1)
New Questions in Engineering
The diameter of a cylinder is called the a.) stroke b.) bore c.) principal length d.) radius
Answers (1)
Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.
Answers (1)
What is the last step to the design process? A: Define the problem B: Present solution C: Evaluate a solution D: Develop a solution
Answers (1)
The controller can be considered the brain of closed loop system
Answers (1)
What is the main role of matrix in composites! a) - to transfer stress to the other phases b) - to protect phases from environment c) - to reduce the hardness d) - to enhance ductility
Answers (1)
Home » Engineering » What is the slump test
Sign Up Forgot Password?