Most car owners drive their cars an average of 12,000 miles a year assuming a 20 miles a gallon gas consumption rate determine the amount of fuel consumed by 150 million car owners daily

What is arduino and for what it is used

A 5stage single pipeline computer uses the pipeline mentioned in the lecture (not the book). It resolves the direction and target of a conditional branch instruction at the end of its third pipeline stage.

How much time does it take a freezer to make a tray of ice cubes out of a tray of 0.25kg liquid water at 10 Celsius). Assume the freezer is a constant cycle operating between-8 (Celsius) and 35 (Celsius) with a power requirement of 750 N.

A multilane highway (two lanes in each direction) is on level terrain. The free-flow speed has been measured at 45 mi/h. The peak-hour directional traffic flow is 1300 vehicles with 8% heavy vehicles. If the peak-hour factor is 0.

1. Which of the following is the ideal way to apply pressure onto pedals? A. With your entire body weight behind it B. Gently at first and then with full force C. Stomping with force, so it reacts D. By pressing gradually

True or false 1. The detonation of a low explosive produces a pressure wave that travels at less than 340 m/s. Obj. 5.2

Liquid benzene and liquid n-hexane are blended to form a stream flowing at a rate of 1700 lbm/h. An on-line densitometer (an instrument used to determine density) indicates that the stream has a density of 0.810 g/mL.

Flow at the inlet and outlets can be assumed One-dimensional for the sake of simplicity. (a) Explain how this assumption simplifies the Reynolds Transport Theorem equation (provide complete, detailed answer) (b) This assumption introduces errors

Estimate the theoretical fracture strength (in MPa) of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped internal crack of length 0.25 mm that has a tip radius of curvature of 0.

B. Is the "Loading Time" of any online application a functional or a non-functional requirement? Can the requirement engineers specify this property before the system is actually implemented, how?