Ask Question
EngineeringEngineering
3 August, 14:53

Why should a toolpath be verified on the screen of a CAM system prior to creating the program code?

+2
Answers (1)
  1. 3 August, 17:32
    0
    The tool's trajectory in a CAM program refers to the places where the tool will be during the work. It is important to review it before generating the program for the following reasons

    1. analyze the machining strategy and identify which one is better for each piece.

    2. Avoid the collision of the tool holder with the work piece.

    3. Avoid the shock of the tool with the piece.

    4. Prevent the collision of the tool with elements that are not displayed on the CAM such as clamping flanges or screws.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Why should a toolpath be verified on the screen of a CAM system prior to creating the program code? ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
The aerodynamic behavior of a flying insect is to be investigated in a wind tunnel using a ten-times scale model.
Answers (1)
A cube of aluminum 21.0 cm on each side is cooled from 105 °C to 30 °C. If the energy removed from the aluminum cube were added to a copper cube of the same size at 40 °C, what would be the final temperature of the copper cube?
Answers (1)
A sedimentation basin in a water treatment plant has a length = 48 m, width = 12 m, and depth = 3 m. The flow rate = 4 m 3 / s; particle specific gravity = 1.1; water density = 10 3 kg/m 3; and dynamic viscosity = 1.307 10 - 3 N. sec/m 2.
Answers (1)
To increase the expected fatigue service life of a component, we can take the following measures besides the choice of a stronger material: (a) Improving the surface finish; (b) Decreasing stress concentration; (c) the structure shape;
Answers (1)
A force 25 N makes an angle of 30,45 and 75 degree with x, y and z axis. What should be the corresponding force vector?
Answers (1)
New Questions in Engineering
An electric motor M is used to reel in cable and hoist a bicycle into the ceiling space of a garage. Pulleys are fastened to the bicycle frame with hooks at location:s A and B, and the motor can reel in cable at a steady rate of 12 in./sec.
Answers (1)
In what areas of expertise does NIST offer support?
Answers (1)
You are the manager of a firm that produces a product according to the cost function C (qi) = 160 + 58qi - 6qi2 + qi3. Determine the short-run supply function if:
Answers (1)
3. In the text, we described a multithreaded file server, showing why it is better than a single-threaded server and a finite-state machine server. Are there any circumstances in which a single-threaded server might be better
Answers (1)
A wooden cylinder (0 02 x 0 02 x 0 1m) floats vertically in water with one-third of ts length immersed.
Answers (1)
Home » Engineering » Why should a toolpath be verified on the screen of a CAM system prior to creating the program code?
Sign Up Forgot Password?