Water is the working fluid in an ideal Rankine cycle. The pressure and temperature at the turbine inlet are 1200 lbf / in^2 and 1100°F, respectively, and the condenser pressure is 140 lbf/in^2 The mass flow rate of steam entering the turbine is 1.4 x 10^6 lb/h. The cooling water experiences a temperature increase from 60 to 80°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle:
(a) the net power developed, in Btu/h
(b) the thermal efficiency.
(c) the mass flow rate of cooling water, in lb/h.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Water is the working fluid in an ideal Rankine cycle. The pressure and temperature at the turbine inlet are 1200 lbf / in^2 and 1100°F, ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Which of these may be an abnormalitu during your pre drive check a) there is another vehicle nearby b) your mirrors are aligned c) the steering wheel responds d) theres an unidentified puddle
Answers (1)
If i see i dead army person will i be asked questions and if i see the person who did it
Answers (2)
2. Sometimes? are too great for a family to deal with alone
Answers (1)
6.17 (Even or Odd) Write a method isEven that uses the remainder operator (%) to determine whether an integer is even. The method should take an integer argument and return true if the integer is even and false otherwise.
Answers (1)
Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from the person if the exposed surface area and the average outer temperature of the person are 1.6 m2and 29°C, respectively.
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)