Sign In
Ask Question
Engineering
Marvin Nunez
24 January, 08:59
What is storage tank stratification?
+2
Answers (
1
)
Banjo
24 January, 10:00
0
Stratification is the process of arranging the different elements classification in a specific manner.
In the storage tank, hot water and cold water create a specific layer and coexist between them for the process of stratification. Thermal storage and heat storage exchanger are the types of storage tank, in which the stratification process take place.
The density of the cold water is more as compared to hot water. Then, due to this the cold water sink to the bottom and hot ware rises up in the storage vessel. In this way, the water gets heated and the stratification process take place in the tank.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Get an answer to your question ✅
“What is storage tank stratification? ...”
in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
Technician A says that gear lube and bearing grease cannot be substituted due to the different housing and seal designs each lubricant demands in a vehicle. Technician B says that gear lube is thicker than bearing grease. Who is correct?
Answers (1)
For a turning operation, you have selected a high-speed steel (HSS) tool and turning a hot rolled free machining steel. Your depth of cut will be 0.105 in. The diameter of the workpiece is 1.00 in. a. Using a speed of 105 sfpm and a feed of 0.
Answers (1)
function summedValue = SummationWithLoop (userNum) % Summation of all values from 1 to userNum summedValue = 0; i = 1; % Write a while loop that assigns summedValue with the % sum of all values from 1 to userNum end
Answers (1)
You are using a Geiger counter to measure the activity of a radioactive substance over the course of several minutes. If the reading of 400. counts has diminished to 100. counts after 66.
Answers (1)
What is (10 to the power of three) times (3 to the power of 10) ? will give brainliest
Answers (1)
New Questions in Engineering
16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Answers (1)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
What factors are likely to promote the formation of stress corrosion cracks?
Answers (1)
Find the mass if the force is 18 N and the acceleration is 2 m/s2
Answers (2)
Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion
Answers (1)
Home
»
Engineering
» What is storage tank stratification?
Sign In
Sign Up
Forgot Password?