Ask Question
EngineeringEngineering
11 June, 01:21

Segmented solid rockets require what special component? A. Igniters B. Liners C. O-rings D. Nozzle gimbals

+3
Answers (2)
  1. 11 June, 03:08
    0
    D. Nozzle gimbals

    Explanation:

    Segmented solid rockets require the special component, nozzle gimbals.
  2. 11 June, 03:38
    0
    Answer: D) Nozzle gimbals

    Explanation: Igniters are present for the ignition power in the segmented solid rocket, liners are the basic requirement in the engine of the rocket, O-rings are also a general part of the segmented solid rocket. So, these are the general purpose parts of the segmented solid rocket but nozzle gimbals are the special units of the rocket as they provide improved thrust in various direction in accordance with the rocket. So, option (d) is the correct option.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Segmented solid rockets require what special component? A. Igniters B. Liners C. O-rings D. Nozzle gimbals ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
What is the distance 1
Answers (1)
The 40-ft-long A-36 steel rails on a train track are laid with a small gap between them to allow for thermal expansion.
Answers (1)
Water circulates throughout a house in a hot water heating system. If the water is pumped at a speed of 0.50m/s through a 4.0-cm diameter pipe in the basement under a pressure of 3.03x10^5 Pa, what will be the velocity and pressure in a 2.
Answers (1)
N2 flows through an insulated horizontal tube at steady state. With an inlet temperature of 150°C and a velocity change from 2 m/s to 50 m/s, what is the exit temperature?
Answers (1)
Describe an E2 mechanism A. Not stereospecific and not concerted B. Stereospecific and not concerted C. Stereospecific and concerted D. Not stereospecific and concerted
Answers (1)
New Questions in Engineering
If high beam headlights are used improperly, it could cause glare for an oncoming driver or reduce their visibility greatly, increasing the possibility of a collision. a) b) True False
Answers (1)
The value of the critical Reynolds number for the flow over a flat plate is 5 x10^5. The significance of the value is: (a) The boundary layer will be turbulent where the Reynolds number is less than this value.
Answers (1)
The specifications of an electronic device are 24 / - 0.4 Amps. When the device exceeds specifications the average quality cost is $32.00. A sample of the devices had an average value of 23.9 Amps and a standard deviation of 0.211 Amps.
Answers (1)
A vacuum gauge indicates that the pressure of air in a closed chamber is 02 bar (vacuum) The pressure of the surrounding atmosphere is equivalent to 750 in of mercury The density of mercury is 13.95 g / cn and the acceleration of gravity is 9.8.
Answers (1)
The Reynolds number for flow over a fixed horizontal flat plate is constant throughout its length. a) True b) False
Answers (1)
Home » Engineering » Segmented solid rockets require what special component? A. Igniters B. Liners C. O-rings D. Nozzle gimbals
Sign Up Forgot Password?