Brainliest giveaway

just like my questions

The flow rate of liquid metal into the downsprue of a mold is 500 cm3/s. The cross-sectional area at the top of the sprue is 8 cm2, and the height of the sprue is 15 cm.

Is it possible that two types of dislocation coexist. a) - True b) - False

g The pump inlet is located 1 m above an arbitrary datum. The pressure and velocity at the inlet are 100 kPa and 2 m/s, respectively. The pump exit is located 4 m above the same datum. The pressure and velocity are 500 kPa and 3 m/s, respectively.

A power cycle operating at steady state receives energy by heat transfer at a rate Q˙ H at TH = 1500 K and rejects energy by heat transfer to a cold reservoir at a rate Q˙ C at TC = 500 K.

A 10 m3rigid insulated tank contains air at 1000 kPa, 1000 K. It is connected to an adiabatic reversible turbine that has an exit of 100 kPa.

Though still is on the margins of the global agro-food system, organic farming practices are on the rise in the core. In growing crops and raising livestock organically, which of the following are permitted? composted cow manure

Technician A says that a magnetic field can be created by current flow. Technician B says that current can be induced by moving a wire through a magnetic field. Who is right?

9.17 LAB: Name format Many documents use a specific format for a person's name. Write a program whose input is: firstName middleName lastName, and whose output is: lastName, firstName middleInitial.

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder