What engine does the mercedes 500e have

Technician A says that gear lube and bearing grease cannot be substituted due to the different housing and seal designs each lubricant demands in a vehicle. Technician B says that gear lube is thicker than bearing grease. Who is correct?

For a turning operation, you have selected a high-speed steel (HSS) tool and turning a hot rolled free machining steel. Your depth of cut will be 0.105 in. The diameter of the workpiece is 1.00 in. a. Using a speed of 105 sfpm and a feed of 0.

function summedValue = SummationWithLoop (userNum) % Summation of all values from 1 to userNum summedValue = 0; i = 1; % Write a while loop that assigns summedValue with the % sum of all values from 1 to userNum end

You are using a Geiger counter to measure the activity of a radioactive substance over the course of several minutes. If the reading of 400. counts has diminished to 100. counts after 66.

What is (10 to the power of three) times (3 to the power of 10) ? will give brainliest

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion