A fatigue test is performed with a mean stress of 105 MPa and a stress amplitude of 116 MPa. Calculate the maximum stress. You will only have 1 attempt to answer this question. The answer should be in MPa with 0 decimals of accuracy.

You are reassembling a gearbox. The output shaft on the gearbox connects to a machine. The gearbox converts the motor's RPM and torque to the level needed by the machine. The motor tums to the left. The shaft needs to tum to the right FOR

A cylindrical bar of metal having a diameter of 19.7 mm and a length of 206 mm is deformed elastically in tension with a force of 47500 N. Given that the elastic modulus and Poisson's ratio of the metal are 65.1 GPa and 0.

What types of arguments are passed to parameters automatically if no argument is provided in the function cell

A 14 inch diameter pipe is decreased in diameter by 2 inches through a contraction. The pressure entering the contraction is 28 psi and a pressure drop of 2 psi occurs through the contraction if the upstream velocity is 4.0 ft/sec.

Compare the specific fuel consumption of a turbojet and a ramjet that are being considered for flight at M = 1.5 and 50,000 ft altitude (ambient pressure and temperature: 11.6 kPa and 205 K, respectively).

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion