Ask Question
EngineeringEngineering
1 November, 04:39

Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for cornering. B. Provides a gear ratio to increase engine torque. C. Provides a gear ratio to increase engine speed D. Provides a means to reverse the rotation of the output shaft

+4
Answers (1)
  1. 1 November, 05:45
    0
    A. Allows the drive wheels to turn speeds for cornering.

    Explanation:

    A transmission system transferred the engine to rear and front wheels. Some vehicle are only rear wheel driving but some high loaded vehicle are both rear and front wheel driving. mainly transmission system is a collection of gear arrangement.

    Transmission system changes the speed and torque of the vehicle according to the speed and torque of the engine.

    The differential is used to change the speed of wheels at cornering.

    So in the above question all are correct for automotive transmission system except A.
Know the Answer?
Not Sure About the Answer?
Get an answer to your question ✅ “Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for ...” in 📙 Engineering if there is no answer or all answers are wrong, use a search bar and try to find the answer among similar questions.
Search for Other Answers
You Might be Interested in
During his military campaign in what is now Germany, Julius Caesar lead his army of 40,000 soldiers to the western bank of the Rhine River in 55 BCE. On the opposite side of the river, hostile native warriors witnessed their arrival.
Answers (1)
unsigned int SumOfDigits (unsigned int n) Description: Develop a function that takes a non-negative integer n as a parameter and returns a non-negative integer containing the sum of n's digits.
Answers (1)
With 10,000 per day who would be the apparent low bidder; Bidder A was $500,000 and estimated completion date of 200 days. Bidder B was $540,000 and a completion day and estimated completion date of 180. 1. Bidder B 2. Bidder A
Answers (1)
The convection heat transfer coefficient for a clothed person standing in moving air is expressed as h 5 14.8V0.69 for 0.15, V, 1.5 m/s, where V is the air velocity. For a person with a body surface area of 1.
Answers (1)
Describe the steps, tools, and technology needed in detail and explain how mass-producing this piece could increase efficiency and profit.
Answers (1)
New Questions in Engineering
If high beam headlights are used improperly, it could cause glare for an oncoming driver or reduce their visibility greatly, increasing the possibility of a collision. a) b) True False
Answers (1)
The value of the critical Reynolds number for the flow over a flat plate is 5 x10^5. The significance of the value is: (a) The boundary layer will be turbulent where the Reynolds number is less than this value.
Answers (1)
The specifications of an electronic device are 24 / - 0.4 Amps. When the device exceeds specifications the average quality cost is $32.00. A sample of the devices had an average value of 23.9 Amps and a standard deviation of 0.211 Amps.
Answers (1)
A vacuum gauge indicates that the pressure of air in a closed chamber is 02 bar (vacuum) The pressure of the surrounding atmosphere is equivalent to 750 in of mercury The density of mercury is 13.95 g / cn and the acceleration of gravity is 9.8.
Answers (1)
The Reynolds number for flow over a fixed horizontal flat plate is constant throughout its length. a) True b) False
Answers (1)
Home » Engineering » Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for cornering. B. Provides a gear ratio to increase engine torque. C. Provides a gear ratio to increase engine speed D.
Sign Up Forgot Password?