4 main causes of erosion

A rectangular steel alloy A-36 (structural steel) plate is hanging vertically and supporting a hanging weight of 90 kN. The plate has a length of 0.5 m, a width of 75 mm, and a thickness of 6 mm.

Benzoic acid 1.35 g, is reacted with oxygen in a constant volumecalorimeter to form H2 O (l) and CO2 (g) at 298 K. the mass of the water volume in the inner bath is1.376*103 g. The temperature of the calorimeter and itsconstant rises 3.

Fixed objects that fix a location are called

Design a circuit using D flip-flops that will generate the sequence 0, 0, 1, 0, 1, 1 and repeat. Do this by designing a counter for any sequence of states such that the first flip-flop takes on this sequence.

Just upstream of a shock wave, the air temperature and pressure are 288 K and 1 atm, respectively; just downstream of the wave, the air temperature and pressure are 690 K and 8.656 atm, respectively.

16 Suppose that a steel of eutectoid composition is cooled to 550°C (1020°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.

The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder

What factors are likely to promote the formation of stress corrosion cracks?

Find the mass if the force is 18 N and the acceleration is 2 m/s2

Which process must first take place in order for the proteins in foods to be used by body cells? (1) digestion (3) synthesis (2) storage (4) excretion